White Rodgers 1F95-1277 Instruções de Operação descarregar pdf

Big Blue Universal Thermostat with

Automatic Heat/Cool Changeover Option

Single Stage, Multi-Stage, Heat Pump

Installation and Operating Instructions for Model:

APPLICATIONS

1F95-1277 Touchscreen Thermostat

SPECIFICATIONS

Electrical Rating:

Battery Power.......................... mV to 30 VAC, NEC Class II, 50/60 Hz or DC

Input-Hardwire ......................... 20 to 30 VAC

Terminal Load ............................. 1.5A per terminal, 2.5A maximum all terminals combined

Setpoint Range ............................ 45 to 99°F (7 to 37°C)

Differential (Single Stage) .................... Heat 0.6°F; Cool 1.2°F

Differential (Multi-Stage) ..................... Heat 0.6°F; Cool 1.2°F

Differential (Heat Pump) ..................... Heat 1.2°F; Cool 1.5°F

Operating Ambient.......................... 32°F to +105°F (0 to +41°C)

Operating Humidity ......................... 90% non-condensing max.

Shipping Temperature Range ................. -4 to +150°F (-20 to +65°C)

Dimensions Thermostat...................... 4-9/16"H x 5-13/16"W x 1-3/16"D

CAUTION

To prevent electrical shock and/or equipment damage,

disconnect electric power to system at main fuse or

circuit breaker box until installation is complete.

ATTENTION: MERCURY NOTICE

This product does not contain mercury. However, this

product may replace a product that contains mercury.

Mercury and products containing mercury must not be

discarded in household trash. Do not touch any spilled

mercury. Wearing non-absorbent gloves, clean up any

spilled mercury and place in a sealed container. For proper

disposal of a product containing mercury or a sealed

container of spilled mercury, place it in a suitable shipping

container. Refer to www.thermostat-recycle.org for

location to send the product containing mercury.

Save these instructions for future use!

FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS

CAREFULLY BEFORE INSTALLING OR OPERATING THIS

CONTROL COULD CAUSE PERSONAL INJURY AND/OR

PROPERTY DAMAGE.

Model Programming Choices

1F95-1277

Non-Programmable 5/1/1 Day 7 Day

THERMOSTAT APPLICATION GUIDE

Description

Heat Pump (No Aux. or Emergency Heat) Yes

Heat Pump (with Aux. or Emergency Heat) Yes

Systems with up to 3 Stages Heat, 2 Stages Cool Yes

Heat Only Systems Yes

Millivolt Heat Only Systems – Floor or Wall Furnaces Yes

Cool Only Systems Yes

Gas or Oil Heat Yes

Electric Furnace Yes

Hydronic (Hot Water) Zone Heat – 2 Wires Yes

Hydronic (Hot Water) Zone Heat – 3 Wires Yes

Wired Remote Temperature Sensor (Indoor/Outdoor) Yes

Dual Fuel Feature (Heat Pump Mode) Yes

Index Page

Installation 2

Wiring Connections 2

Thermostat Quick Reference 3

Installer Conguration Menu 4

Operating Your Thermostat 7

Programming 7

Troubleshooting 11

PART NO. 37-6753D

Replaces 37-6753C

1150

www.white-rodgers.com

www.emersonclimate.com

1 2 3 4 5 6 ... 11 12

Resumo do Conteúdo

Página 1 - SPECIFICATIONS

Big Blue Universal Thermostat with Automatic Heat/Cool Changeover OptionSingle Stage, Multi-Stage, Heat PumpInstallation and Operating Instructions fo

Página 2 - INSTALLATION

10PROGRAMMING Wired Remote Temperature SensingOne remote temperature sensor can be installed indoor or outdoor and connected to the thermostat by a ma

Página 3 - THERMOSTAT QUICK REFERENCE

11TROUBLESHOOTING Reset Operation Note: When thermostat is reset, installer conguration menu settings and programming will reset to factory settings.

Página 4 - INSTALLER/CONFIGURATION MENU

HOMEOWNER HELP LINE: 1-800-284-2925White-Rodgers is a business of Emerson Electric Co.The Emerson logo is a trademark and service mark of Emerson El

Página 5

22 "AA" BatteriesWIRING CONNECTIONS Refer to equipment manufacturers' instructions for specic system wiring information. After wiring,

Página 6

3Time of DayDay of WeekRoomTemperatureSystemSwitchFanSwitchIndicates whenthermostat is callingfor Heat or CoolBattery Level IndicatorIndicating the cu

Página 7 - IMPORTANT!

4INSTALLER/CONFIGURATION MENUTo enter the menu: Press the Menu touch key. Press and hold for 5 seconds the Installer Cong touch key. This displays me

Página 8

5INSTALLER/CONFIGURATION MENUthe thermostat compressor time delay is activated, it will ash the set point for up to ve minutes.11) Select Continuou

Página 9

620) Heat Temperature Limit Range – This feature adjusts the highest setpoint temperature for heat. The default setting is 99°F. It can be changed b

Página 10 - PROGRAMMING

7OPERATING YOUR THERMOSTATChoose the Fan Setting (Auto or On)Fan Auto is the most commonly selected setting and runs the fan only when the heating or

Página 11 - TROUBLESHOOTING

8PROGRAMMING Enter the Cooling Program1) Press the SYSTEM button until the Cool icon appears.2) Follow Enter Heating Program instructions for enterin

Página 12 - The Emerson logo is a

9PROGRAMMING Energy Saving Factory Pre-ProgramThe 1F95-1277 thermostats are programmed with the energy saving settings shown in the table below for al